We Are Carpet Cleaners In Cary & Raleigh NC - Call (919) 746-7454
 

You may be wondering whether you should clean your carpet using the dry cleaning method or the steam cleaning method. The answer to this depends on many factors. By the end of this article you should have a basic idea about the difference between the two methods and which one is best for your own personal use.

Steam cleaning is pretty self explanatory. The basic idea is that steam is used to loosen and remove the dirt from the carpet. There are many different types and brands of steam cleaners, but the basic concept is generally the same throughout. Most steam cleaners also use some type of liquid soap solution to help clean and freshen the carpet as well. Some steam cleaners have dryers on them which are good for drying the carpet faster and helping to prevent new dirt from sticking to the wet floor.

Dry cleaning is a significantly different method than steam cleaning. Dry cleaning, unlike steam cleaning, does not use any liquid during the cleaning process. Instead, various chemicals in powder form are sprinkled on the floor and left to set for a specified amount of time. Once those chemicals are done sitting, they are vacuumed away, along with the dirt and stains that were in the carpet. There are a few different methods of dry cleaning carpets, which include the dry-chem method, the oscillating pad method, the dry foam method, as well as others.

The big question you are probably wondering about is whether dry cleaning or steam cleaning gets your carpet cleaner? Unfortunately, this is a hard question to answer. The only way you can really be sure about which method to choose it to try it yourself, although there are some things that can help you choose which one might be better for you. The dry cleaning method may be better if you are planning on using the carpets again right away, as carpets that are chemically or dry cleaned are completely dry much faster than those that are steam cleaned. If you have small children crawling around on the floor, it may be more beneficial health wise to steam clean the carpets and keep the children off of them until they dry. This may seem inconvenient, but you will feel much better knowing that your children are healthy and safe from chemicals.

Dry cleaning and steam cleaning are both good methods for getting your carpet clean. Prices vary depending on what company you use but generally the prices for steam cleaning and dry cleaning are pretty comparable to one another. Both can be done either professionally or at home, although for home use there are many more products available for steam cleaning.

Tags: Carpet Cleaning, steam cleaning, steam cleaners, dry foam, soap solution, Steam Cleaning Carpet

Incoming search terms for the article:

Steam Carpet Cleaning

Steam Carpet Cleaning

Steam cleaning is a process in which hot water is fed to a wand or spray extraction tool that is connected to a pump vacuum power unit. Water nozzles deeply inject the cleaning solution into the carpet using water pressure, forcing it all the way to the bottom and into the backing. Your carpet will end up cleaner than it has ever been after this process removes oil and grease deposits, and embedded soil and other debris that a vacuum alone cannot touch.

All steam cleaners work the same, and there is quite a variety of them, ranging from the most powerful units that are mounted on trucks to the small portables that are often available for rental at hardware stores. The truck mounted variety are made in a way that the wand and house are the only parts taken to the area that needs to be cleaned. They are mounted on a truck for a reason; they are extremely powerful and use motors that run on gasoline, propane, or diesel fuel. Depending on the design of the truck and the vacuum unit, it may even be powered by the truck’s own motor. This type of power is needed for the high vacuum and fast, high pressure hot water delivery that is provided.

Most everyone in the carpeting industry endorses this extremely efficient process for removing soil, including professional cleaners, carpet manufacturers; even the fiber producers themselves. We are infinitely capable of high production and cleaning of carpet with today’s state of the art technology and equipment.

The only disadvantages in steam carpet cleaning involve problems that come from longer drying times and over wetting. A skilled operator who uses well maintained equipment in good operating condition can easily eliminate this problem.

There are currently two different steam carpet cleaning methods. The first involves spraying a traffic lane cleaner onto high traffic areas, then agitating it into the carpet’s fibers. A hot water extractor, which utilizes a wand that injects cleaning solution deep into the fibers is then used to clean the entire area. The other method does not concentrate on high traffic areas, using a free rinse emulsifying pre-spray that is sprayed over the entirety of the carpet before being agitated down into the fibers.

Steam cleaning begins with preparing the equipment and supplies. The free rinsing pre-spray must be mixed and put into a power sprayer or pump. The rinsing agent will go in the extractor’s solution tank. Furniture will need to be cleared as much as possible; it may help to develop a floor plan if there is a lot of furniture. The carpet should be thoroughly vacuumed. A pile brush may be useful is loosening any soils to make it easier for the vacuum to pick up. Once the carpet is vacuumed, pre-spray should be applied liberally and agitated deeply into the fibers, where it should remain for 10 – 15 minutes, though care must be taken to not allow it to dry. After the pre-spray has soaked , the area should be extracted with either an automatic, portable, or truck mounted carpet cleaner.

Once all of the pre-spray has been extracted, the cleaned area can be groomed, the furniture replaced, and the equipment cleaned and put away. That’s all it takes to get nice, clean carpet.

Tags: traffic lane, Carpet Cleaning, Steam Cleaning Carpet, steam cleaners, carpet cleaning methods

Incoming search terms for the article: